Go.8
999,00 €
The best system for foolproof set up! GO.8 Is an automatic backing track switcher with back up. It is
capable of automatically switching 8 Audio channels, one Midi line, one
Video line. GO.8 works with BBeat and Computer-based systems.
Description
Go.8
999,00 €
The best system for foolproof set up! GO.8 Is an automatic backing track switcher with back up. It is
capable of automatically switching 8 Audio channels, one Midi line, one
Video line. GO.8 works with BBeat and Computer-based systems.
GO.8 - just play!
GO.8 is an automatic switcher for redundant backup management. It is in
capable of automatically switching 8 Audio channels, one Midi line, one
Video line. Switching can be between two audio players such as computers with sequencers, or two B.Beat or other sound and/or video sources.
GO.8 is ideal for live concerts and theatrical performances where
Backing Tracks, Midi and Video tracks that cannot be interrupted are used.
8 Audio Output Channels
2 Groups of 8 input channels
Automatic Audio Switch
Automatic Midi and Video Switch
For BBeat or Pc
NEVER CRASH ON STAGE AGAIN
GO.8 exploits a gate that detects the crash of the main machine and switches to the "backup" machine in real time, ensuring continuity even in case of failure.
Two groups of audio inputs (with 8 balanced channels), two video inputs, and two Midi inputs are available, and switching between the two groups is done automatically by means of a SYNCH-specific audio signal (sinusoidal, 1 kHz frequency) on GO.8 channel 8. As soon as the lack of this signal is detected, the device switches to input group B (redundant).
Switching can also be done in a manual manner using the SELECT button on the front panel.
COMPACT AND ROBUST
Housed in a sturdy 19″ GO.8 steel rack, it has a choice of 25-pin D-sub or 1/4″ TRS input connectors with D-Sub and XLR outputs.
The front-panel XLR jacks produce a DI signal with balanced microphone level to feed a snake system and are transformer-isolated to eliminate hum and hiss caused by ground loops.
D-Sub connectors at the rear of the panel provide balanced direct line-level connectivity.
WITH BBEAT: TO THE TOP!
Using M-Live's products from the B.Beat line, it is possible to send the mixed SYNCH signal to audio tracks on input 8 of the GO.8 (either Jack or DB25).
This allows all available outputs on B.Beat to be used without having to sacrifice one for GO.8 operation.
CASCADE MANAGEMENT
For complex configurations, multiple GO.8 can be connected, creating 16-, 24- or 32-track systems.
In the diagram opposite, two GO.8 are cascaded to handle 16 audio channels generated by BBeat PRO16.
Also connected are the Midi and Video signals that GO.8 can handle in redundancy as the Audio signal.
EVEN WITH PCS AND TABLETS
GO.8 is also suitable for Computer use.
In this case, it is necessary to use one of the Audio tracks as Drone, in order for GO.8 to have the proper signal to perform the switch in case of a Crash from the main computer, or Main.
It will be necessary to record on the DAW an audio track with a technical signal that will drive GO.8. This track is not necessary if two BBeat are used for Backing Tracks.
GO.8 is the ideal device to build a system that is foolproof, and can prevent any kind of Crash on stage.
SMPTE TRACK MANAGEMENT
GO.8 has a function for reading SMPTE timecode as an LTC signal from channel 7 (both group A and B) for real-time verification of the timecode value.
The unit's power supply is also redundant: two power supplies can be connected to prevent shutdowns due to the failure of one power supply.
JUST PLAY!
The best system for building a foolproof set up on stage!
TECHNICAL DATA SHEET.
| Input Audio A and B groups |
● 2x8 Line Input on Jack 6.35 mm TRS, balanced (or unbalanced with TS cable) ● 2x8 Line Input on DB25, balanced ● Impedance > 15 kΩ ● Maximum amplitude +20 dBu, unbalanced |
| Audio Output Front (XLR) |
● 8 Audio Output XLR with 3 poles, balanced ● Impedance 600 Ω Gain: -20 dB Features: Mute, GND LIFT |
| Rear Audio Output (DB25) |
8 Audio output on DB25, balanced ● Gain: 0 dB Not transformer isolated |
| Frequency response | 10 Hz up to 20 kHz |
| Link with other units |
1x Link In Jack 6.35 mm TRS 1x Link Out Jack 6.35 mm TRS To be linked with TRS Cable only |
| Display | 2.4" OLED, 128x64 |
| MIDI |
2xMIDI IN (groups A and B) 1xMIDI OUT |
| Video |
2xIN (groups A and B) 1xOutput Resolution: ● 1920x1080 - 60 Hz ● 3840x2160 - 30 Hz (4k) Cables HDMI V 1.4 |
| Synch signal |
1 kHz sine wave audio signal detected on channel 8 (groups A and B) Minimum signal level: ● balanced -12 dBu ● unbalanced -6 dBu |
| Timecode SMPTE |
SMPTE timecode decoding (LTC signal) performed on channel 7 (for both input groups A and B) Minimum signal level: ● balanced -12 dBu ● unbalanced -6 dBu |
| Power supply input |
12 VDC, 2 A, consumption max < 4 W Double input for redundancy |
| Power supply | AC/DC Adapter Mod. 13/90288-00 INPUT 100-240VAC Freq 50-60Hz OUTPUT 12VDC - 2A |
| Weight and Dimension | 48 x 18 x 4.5 cm - 2.5 kg |
USER MANUAL.
The GO.8 User's Manual is also available online in PDF format.
You can download it by clicking HERE and view it conveniently online.
RELATED PRODUCTS
Additional information
| Version | 64 Gb, 128 Gb, 256 Gb + Hard Bag |
|---|
Related Products
-
B.Beat Pro16
1.389,00 € - 1.689,00 € Choose This product has multiple variations. Options can be chosen on the product page -
MERISH 5+ PLUS
1.949,00 € Add to Cart -
X-LIGHT 4
289,00 € Add to Cart -
B.BEATX
494,00 € - 629,00 € Choose This product has multiple variations. Options can be chosen on the product page
